1-1

1.产品使用的最大工作温度，最大功率等均依照规格书要求作业，不可超出规格书之范围。

( Maximum service temperature and  maximum power  in application should not exceeds specification listed in  Product  Specification)

2.产品移动、安装必须轻拿轻放，不可用力拉动。

(Much be handled with care when moving and installing the product)

3.外壳发生变形、氧化等现象时，不要使用，以免影响感温精度。

(Product should not be used when deformed or rusty casing is observed on product

4.产品外观发生变形、破损时，不可使用，以免影响电气性能。

(Product should not be used when broken housing ,or excessive deformation on housing is observed)

5.在操作温度范围内，应尽量避免过于激烈的温度变化。

(Avoid excessive  temperature fluctuation when operating the product in its operational temperature range)

6.不可施加过度振动的压力。

( Do not apply excessive shock and vibration  on product)

7.避免过度拉伸、弯曲导线。

( Do not pull or bend the lead wire  excessively)

8. 不要使用在有腐蚀性气体(CO2,NH3,Sox,Nox)超出指定的条件。

   不要使用在电解、盐、酸、碱性和有机溶剂超出指定的条件。

   (Do not use in any ambient with  corrosiven gas (CO2,NH3,Sox,Nox)

   (Do not use in any ambient with electrolytic solution with brine,acid,alkaline and organic )|

9.尽可能避免使用在有水、高湿及其他带腐蚀性的环境中

(Do not use in  environment with water.high moisture,and high corrosive solution)

10.通过负温度系数温度感测器的电流会引起元件自身发热而产生测量误差，因此需在使用前将此因素考虑在内
(Current throught NTC element will cause self-heating,and may affect the measurement)

11.此款产品属表面平贴式感测温，使用时需使底部平面充分受热。

(This product belongs to surface appressed type sensor temperature, when using, need to make bottom plane fully and heating.)

1-2

如果有任何不清楚的地方,请咨询到我们公司的销售主管或工程师.

(If there is anything question and concerns, please contact to our  sales representative and engineer)